Bringing commercial-grade car wash technology to your driveway!
A safe & effective way to easily remove waxes, water-based sealers, & solvent based coatings
Replace multiple detailing products with this one product that does it all. This new and improved formula is our #1 best seller.
Crystaleen® is a professional 2-part ceramic sealant once sold only to auto-dealers & TopCoat® certified installers in the commercial market and backed by a 5 year unconditional warranty that guaranteed protection against all environmental or man-made damage caused over time.
Recognizing the trend of "ceramic" technology entering the retail market, TopCoat® released Crystaleen®, a "true" commercial-grade ceramic coating reserved only for the pros, directly to the end consumer so those who wanted the very best ceramic technology could buy and apply it themselves, saving thousands of dollarsin the process versus having it professionally applied!
Easy Application: Crystaleen® was specially formulated for easy application, eliminating clean rooms, 48-72 hour undisturbed cure times, controlled humidity levels and other controlled conditions that every other professionally applied ceramic must adhere too or catastrophic failures are inevitable. With a proprietary formula made for easy use, a simple 2 stage application process, and an immediate cure time so you don't have to wait for it, you don't need to be a Pro to apply Crystaleen®!
Proprietary and patented, Crystaleen®'s glass-like technology is second to none, offering 5+ years of proven performance, 7h durability, & unyielding protection from decades of real world commercial use, layer after layer, that no other coating can do or match, period. Crystaleen® is an actual sealant, a "real" commercial grade ceramic that permanently bonds when applied, unlike all of the "hybrid-ceramic" sealers sold online or in stores that are falsely sold as real ceramics, however these hybrid-ceramics are non-permanent, lasting only a few months vs years, with no durability, hardness, or actual protection.
So, if you want the best, here it is or your money back! Finally, a real professional ceramic you can easily apply yourself!
Average Coverage: 8 motorcycles or 4 vehicles, or multiple layers
Average Coverage: 2 motorcycles or 1 vehicle, or multiple layers
MIXING: CRYSTALEEN® is packaged in two separate bottles labeled Stage 1 - Ceramic Sealant/Glassifier™ and Stage 2 - Curing Solution-Hardener, without exposure to air.
Stage 1 - Ceramic Sealant/Glassifier™: Shake vigorously for a minute or two until all white sediment is mixed thoroughly in the solution and in full suspension. Puncture seal and thread on pour cap clockwise until tightly secure.
Stage 2 - Curing Solution-Hardener: This stage does not need to be shaken. Puncture seal with trigger down spout, then thread trigger on clockwise until tightly secure.
The surface to be coated must be clean, dry and free from dirt, oily residue, grime, loose oxidation, spores (mildew) or any other surface contaminate that could affect product performance. It is imperative to fully and completely clean the surface, as CRYSTALEEN® adheres by chemical and mechanical bonding and must gain proper contact with the surface.
Stage 1 - Ceramic Sealant/Glassifier™:
Stage 2 - Curing Solution-Hardener:
Shipping Restrictions: This product ships ground, if you're in another country, additional shipping charges apply.
DIY ceramic coating kit for a beginner or a professional. This complete kit includes a wax/sealer remove, powerful wash, and Crystaleen®.
Crystaleen® is a permanent coating that bonds molecularly to the surface and is a permanent coating/sealant. F11® can be applied directly over dust dirtt without scratching, due to the slick additives that encapsulate dirt. Crystaleen® needs to be applied to a clean, prepped surface. F11® repels dust and dirt because of its slickness, while Crystaleen® carries a positive charge at the surface to ionically repel dust and dirt! F11® is the best way to clean the surface and add an extra shine over your Crystaleen®, they go very well together in maintaining any surface!
Yes, Crystaleen® can be applied over F11®, or F11PRO®, however we recommend waiting at least 30 days after the last application to apply Crystaleen®. Then you can follow the preparation and application steps as usual!
Yes, Crystaleen® can be applied to paint protection film for added protection.
80% of the coating cures instantly, the rest takes 5-7 days for hard curing. However, you don't need to do anything special during the curing period. You can get it wet immediately, or apply another coat, without having to wait!
Crystaleen® can be applied to almost anything! We don't recommend it on leather or soft materials like dashboards. It won't do much for tires, but it's great on rims! If you're wanting to use it on older materials that are heavily oxidized, try it in an inconspicuous spot FIRST to make sure you get the desired results you want. Vinyls, plastic, glass, chrome etc are safe! Heat doesn't bother it at all, and it protects against corrosion!
It lasts a minimum of five years! It's an aerospace coating, the backbone of our technology that was used on the space shuttle! It will not wear off because it is bonded on a molecular level. Nothing will remove it, besides abrasion.
USED ON CARS, TRUCKS, MOTORCYCLES, BOATS, RV, PLANES AND MORE!