TopCoat Products FAQs

F11PRO®is our new advanced H2OAmino-Functional Technology coating from TopCoat!

This is better technology over other hybrid-ceramics, graphene coatings, and more due to its bonding capabilities for wear and durability.  Combined with MycroGlide technology, neutral static properties, gloss & shine additives, corrosion inhibitors, UV absorbers, chemical, detergent, and solvent resistant benefits, and weather wearing capabilities in a safe water based formula, F11PRO offers more than any other coating on the market. 

F11PRO®surpasses most comparable products on the market in ingredients that offer protection from the environment.  However, the higher the percentage of SIO2 in a coating does not mean the coating is somehow better than one with less or no SIO2 in the coating. A few online competitors are attempting to use this as an indicator of performance which is nothing more than a marketing ploy to attract attention. There is much more involved in the formulation of a coating to achieve performance & protection such as other ingredients that contribute to wetting, bonding, slip, adhesion, PH, cross-linking, gloss, color, molecular weight, stability, abrasion, chemical resistance, surface tension, corrosion, heat, flexibility, and other properties. Equally important is how these ingredients are mixed together, ionically adapt or don't, and at what ratios. A 1% SIO2 coating can outperform a 13% SIO2 coating all day long. This is why we don't give out our percentage, as it doesn't mean anything in the whole of the formulation. We know this because we formulate our own products, unlike most of our online competitors that are just marketing agencies.

F11PRO® goes even further than our classic F11®. It will last longer on the surface, and will spread further minimizing product use further. One 16oz bottle will cover 12-16 full sized vehicles. The first application, if never been coated with F11 Classic or F11PRO before, will take the most product, around 1.5 - 2 ounces. depending on the size of the vehicle and if the interior is to be treated as well. 

You will use less product with each additional application, typically using 1/2 an ounce to an ounce overall. If you are applying over F11®, you will use less product on your initial application.

F11PRO® lasts up to, or over 12 months based on conditions such as weather, location, how often you go through car washes, etc. We recommend reapplying at least every 3 - 6 months for maintenance.  F11PRO, like F11, is a repetitive technology, meaning you can't over apply it and each application only improves the life span, condition, and value of your vehicle.

Yes! You do not need to remove the existing F11® coating so you can apply right over.

PolyWash® will not remove wax, and because it helps prep the surface to bond with our other products, it is the perfect product to use before applying a coat of F11. PolyWash® will not remove water spots, but due to the nature of the coating it applies, will significantly reduce the amount of new water spots that are able to form on the surface.

TopCoat®PolyWash® is the perfect prepping soap for TopCoat® Sealers like F11®and HPS®. PolyWash® contains TopCoat® coating technology and has Micro-Bond technology which perfectly preps the surface for TopCoat® sealers such as F11® and HPS®. If  you go too long without cleaning, you can use PolyWash® to safely clean the surface as well as leaving behind a Micro-Bond coating that will bond with our sealers like F11® and HPS®. All soaps on the market are very abusive to surfaces, PolyWash®is a high-tech, entirely different approach. PolyWash® will not cause swirl marks and spiderwebs like the existing washes do. Technically you only need PolyWash® once, to prep the surface for F11®, HPS® and Spritz®. Going forward, you'll clean by reapplying our coatings... but you always have PolyWash® if you feel like you waited too many months to clean and you feel better washing.

Yes!

No, PolyWash®will not remove F11® or F11PRO®. PolyWash® is made to work with both, and actually applied a micro-thin layer of F11®, so you will be washing and protecting your surface at the same time.

Yes you can! Just use about 1oz in the soap dispenser. If you want more soap, just adjust the amount accordingly.

1oz of PolyWash® should cover approximately 440sqft of surface area. That means that a bottle will cover 7040 sqft. To make this a little more practical, we recommend using 1oz in a gallon of water for a regular washing of your car, or 2oz in a gallon if it is particularly dirty.

Gla-C®is our glass cleaner and polisher in one. It is a true cleaner, and it will leave a streak-free shine.

Yes! Gla-C®is made to be used on all glass, window film, acrylics, & isinglass.

Absolutely! Gla-C®will clean and protect window tint without causing any peeling or cracking.

Gla-C®will clean and polish your windows at the same time. You do not need to wash that surface beforehand to use Gla-C®, which is one of the main benefits of Gla-C®.

No, Gla-C®is formulated to leave a streak-free shine and give optimal optical clarity, so windows, windshields, glass, and mirrors are left crystal clear.

No, TopCoat®TireDress®has been formulated with anti-sling technology. If you apply a heavy coat of TireDress®and immediately go driving, there could be some slinging. We recommend not overapplying, and if you do apply a heavy coat, wait at least 10-20 minutes.

No, TireDress®will not make the tires slippery.

One application will last up to 3 months depending on driving conditions.

Spritz® is a safe and effective water-based speed detailer and waterless wash in one!  Spritz was made to clean, enhance, and improve your entire vehicle's surfaces, inside and out, without using water, car washes, cleaners, or traditional means of cleaning.  

Perfect for those that live in water regulated dry areas so you can still have that perfectly clean & shiny ride!  

Spritz® is also ideal for the person who doesn't have the time but wants the shine!  Fast, effective, professional results in minutes, without the work! Spritz® is a quick way to maintain and enhance any surface.  It can be used as a waterless wash (dry-wash for short)  to keep the vehicle clean, or use Spritz between F11® coatings. Spritz® will only improve the original surface's appearance regardless of finish.  Matte finishes look new without gloss, yet glossy finishes get an improved shine and depth of image. Spritz® is an economical way to keep your vehicle perfectly maintained, saving you time and money!  

Safe for: PPF, acrylic, vinyl, leather, wood, metal, plastic, glass, fabric, gelcoat, aluminum, powder coating, carbon fiber, rubber, gloss or matte finishes,  

Use on: All interior & exterior surfaces, including engines (no heat issues) - motorcycles, cars, trucks, boats, RVs, planes, atvs, scooters, and more

One application of Spritz® may last up to 3 months!

With Spritz®, a little goes a long way. Spritz® is a quick detailer & waterless wash in one so you would typically use 2 ounces or less of product for a full sized vehicle. 

 Spritz® is a Speed Detailer and is ideal to use after a Crystaleen ceramic application, or in between applications of F11® or F11PRO®. 

Yes! Spritz® is a waterless wash, so if you have a water issue, or a time issue, and can't wash your vehicle traditionally Spritz® is the perfect solution! 

Spritz is the designed to wash, clean, and shine all in one without water, so washing is no longer needed.  Ideal for dry or water regulated areas.

EzClay is developed to work with TopCoat’s PolyWash, F11PRO or Spritz, providing paint correction and coating protection all at the same time, a first in the detailing industry, saving valuable time, money, and effort by doing two jobs at the same time!

EzClay eliminates the need for a fine, medium, or aggressive clay bar due to its new and advanced all-in-one compound design, offering the cutting performance of all three bars in one. This advanced compound technology also eliminates any potential of marring or scuffing the paint associated with aggressive bars.  This technology takes away the guess work when it comes to choosing the right clay bar and simplifies the process without by eliminating extra corrective measures like buffing out added marring caused by cheap clay bars or abrasive compounds. Whether you are a first time user, or a professional, EzClay will inspire confidence with an easy to use, high performance paint corrective system.

Often overlooked is the color of the clay, yet it’s a gamechanger for a professional. White shows everything and allows the user to easily see and quickly identify the foreign debris that is removed during the clay bar process. Quickly identifying embedded debris with a quick glance can be the difference between marring a finish or not, as the clay is continuously used, folding debris into it as you go. White clay allows the user to visually catch hazardous particles, preventing the potential of causing damage to the finish.

EZClay is effective on any hard surface from paint, plastic, glass, chrome, and more.

TopCoat® UnCoat® is a wax stipper, so it will remove any water-based sealers, and several solvent based coatings by hand, without mechanical methods like buffing or wet sanding.

UnCoat® will remove F11®, but for F11PRO®, it will need to be applied several times to remove it. 

UnCoat® will not remove coatings from woods but can be use to clean wood before applying a coating

No, UnCoat® will not, but always test in an inconspicuous area to be safe.

Yes, UnCoat®will remove road tar. Use F11® or F11PRO® to restore the finish afterwards!

Crystaleen®is a permanent coating that bonds molecularly to the surface and is a permanent coating/sealant. F11®can be applied directly over dust dirtt without scratching, due to the slick additives that encapsulate dirt. Crystaleen®needs to be applied to a clean, prepped surface. F11® repels dust and dirt because of its slickness, while Crystaleen®carries a positive charge at the surface to ionically repel dust and dirt! F11®is the best way to clean the surface and add an extra shine over your Crystaleen®, they go very well together in maintaining any surface!

Yes, Crystaleen®can be applied over F11®, or F11PRO®, however we recommend waiting at least 30 days after the last application to apply Crystaleen®. Then you can follow the preparation and application steps as usual!

Yes, Crystaleen®can be applied to paint protection film for added protection.

80% of the coating cures instantly, the rest takes 5-7 days for hard curing. However, you don't need to do anything special during the curing period. You can get it wet immediately, or apply another coat, without having to wait!

Crystaleen®can be applied to almost anything! We don't recommend it on leather or soft materials like dashboards. It won't do much for tires, but it's great on rims! If you're wanting to use it on older materials that are heavily oxidized, try it in an inconspicuous spot FIRST to make sure you get the desired results you want. Vinyls, plastic, glass, chrome etc are safe! Heat doesn't bother it at all, and it protects against corrosion!

It lasts a minimum of five years! It's an aerospace coating, the backbone of our technology that was used on the space shuttle! It will not wear off because it is bonded on a molecular level. Nothing will remove it, besides abrasion.

SapErase™  is specially formulated to remove sap, glue, gum, and tar.

Yes, SapErase™ will remove F11®, however, it will take more applications to remove F11PRO®.

No, SapErase™is safe to be used on any automotive finish. 

Yes, you should reapply F11®or F11PRO®to protect your finish again. 

Yes! SapErase™ works great on fabric, which also includeds convertible tops!

TopCoat® SSP (Stainless Steel Polish) is a specialized polish and protective coating designed for stainless steel surfaces. It enhances the metal's natural shine without leaving a greasy residue, and it creates a protective barrier against fingerprints, dust, and stains.

Yes, SSP is suitable for all types of stainless steel, including appliances, kitchen surfaces, and outdoor grills. It's formulated to work effectively on any stainless steel surface, both indoors and outdoors.

To apply SSP, simply mist it onto the surface and buff it in using a clean microfiber towel. For a streak-free finish, use a dry section of the towel for a final buff. Repeat the process for each area until complete.

SSP is designed to fill in minor marring or micro-scratches, enhancing the appearance of your stainless steel. However, it's not a repair product for deep scratches.

We recommend reapplying SSP periodically for optimal protection and shine. The frequency depends on the usage of the surface; high-traffic areas may benefit from more frequent applications.

Yes, SSP is non-toxic and safe to use around food preparation areas. It contains no harsh chemicals or abrasives, making it a safe choice for kitchen environments.

The longevity of SSP's effects can vary based on the usage and environment of the stainless steel surface. Generally, it offers long-lasting protection and shine, but regular maintenance will enhance its effectiveness.

For best results, clean the surface with a mild cleaner before applying SSP. Avoid using abrasive cleaners as they can affect the polish's performance. TopCoat® APC (All-Purpose Cleaner) is recommended for pre-cleaning.

Yes, SSP is free from VOCs (Volatile Organic Compounds), non-flammable, and safe for both indoor and outdoor use.

SSP stands out due to its advanced formula, which not only enhances the shine of stainless steel but also creates a protective barrier against everyday wear and tear. It's based on the same technology as F11Pro, ensuring superior quality and results.

HPS® is a polish & protective coating for in-home use!  It's designed to REPLACE, outperform, and out-last traditional cleaners & polishes in the home. HPS® is water based which means is safe to clean, renew, and restore anything.  Nothing works better on stainless steel appliances, shower wall tile, granite counters, outdoor kitchens, furniture, cabinets, and more. HPS® will make your home and its contents look new again, preventing dust, dirt, dander, & debris from sticking or building up, so cleaning and maintenance becomes easy!  

Tired of fingerprints on stainless steel?  Oil and grease sticking to surfaces?  Dust, dirt, dander, and debris clinging or sticking?  Want the original beautiful stainless steel metal look without discoloring it like other products do?  Buy HPS.

Inside the home, HPS®can last up to a year or more. We recommend using as often as you like, however cleaning & maintaining you home will significantly go down.  

Yes! HPS®works great on granite and on all countertops.

Yes! HPS®works great on wall tile, glass, stainless steel, cabinets, sink basins, decorative pieces, backsplashes, your entire bathroom!  Just don't coat your floor as its slick!

HPS®will not remove water spots, however, it will prevent it, including hard water deposits, soap scum, and more. We recommend removing those first before applying HPS®.  

F11® is a wax replacement, as well as a polish and sealer in one. It is a safe water based formula that contains no harmful or corrosive substances. F11®  is meant to replace any other detailing product or coating you would need to maintain your vehicle, motorcycle, boat, RV, plane, & more. 

F11®  can be used on any surface or material, including PPF, vinyl (graphics), Isinglass, plastic, acrylic, matte & denim finishes, gloss finishes, wrinkle blank, powder coated finishes, clear coats & non clear coats, metal, stainless steel, chrome, non-ferrous metal, gelcoat/fiberglass, aluminum, wood, leather, fabric, rubber, & more.

One application of F11®lasts an average of 6 months based on conditions. This does vary on your local conditions, and we recommend reapplying at least every 3 months. The more applications, the better the results will be AND the longer F11®classic will last. 

One 16oz bottle will cover 10-12 full sized vehicles. One 16oz bottle will also cover a 40 foot RV 2-3 times. The first application will take the most product, around 2-3 ounces on full sized vehicles. You will use less with additional applications, about 1/2 an ounce to an ounce. A little bit goes a long way with F11®!  

Once you receive F11®, you want to wash and dry the vehicle first. Make sure any preexisting wax or polish is stripped, you can use our TopCoat® UnCoat® to strip & prep the paint. You will then spray F11®onto the surface, spraying in sections. Then you would buff in with a microfiber towel, then buff out with a second dry microfiber towel. Application is super easy. 

F11®fills in light swirl marks, spider webbing, and micro scratches! If your vehicle has heavy scratches they will need to be addressed before treating the surface with TopCoat®. 

Since F11®is a water based product, it can freeze. We recommend when applying during the winter months, or on colder days, to apply when it is at least 32 degrees fahrenheit outside. Try to apply it in a garage, so wind chill will not prematurely dry it before you are able to buff it in properly, which is the same for when it is above 85 degrees Fahrenheit outside. You may need to work quicker to buff in the product so it does not dry before you have had the chance to buff in. 

F11®is good for 2 years when stored in a place where it will not freeze. We recommend storing in a room temperature environment and away from direct sunlight.