TopCoat® PolyWash® brings commercial-grade car wash technology to your driveway!
UnCoat®
A safe & effective way to easily remove waxes, water-based sealers, & solvent based coatings
TOPCOAT® MICROFIBER WASH MITT
An extremely soft microfiber wash mitt perfect for washing your vehicle for a swirl free finish
LUVGLUV® HAND MYCROMITT
The newest & best way to detail your vehicle, or any surface, taking detailing to a whole new level.
$240.99
Ready for a big project? Convenient bundle to prep, polish and maintain
PolyWash® will not remove wax, and because it helps prep the surface to bond with our other products, it is the perfect product to use before applying a coat of F11. PolyWash® will not remove water spots, but due to the nature of the coating it applies, will significantly reduce the amount of new water spots that are able to form on the surface.
TopCoat®PolyWash® is the perfect prepping soap for TopCoat® Sealers like F11®and HPS®. PolyWash® contains TopCoat® coating technology and has Micro-Bond technology which perfectly preps the surface for TopCoat® sealers such as F11® and HPS®. If you go too long without cleaning, you can use PolyWash® to safely clean the surface as well as leaving behind a Micro-Bond coating that will bond with our sealers like F11® and HPS®. All soaps on the market are very abusive to surfaces, PolyWash® is a high-tech, entirely different approach. PolyWash® will not cause swirl marks and spiderwebs like the existing washes do. Technically you only need PolyWash® once, to prep the surface for F11®, HPS® and Spritz®. Going forward, you'll clean by reapplying our coatings... but you always have PolyWash® if you feel like you waited too many months to clean and you feel better washing.
Yes!
No, PolyWash® will not remove F11® or F11PRO®. PolyWash® is made to work with both, and actually applied a micro-thin layer of F11®, so you will be washing and protecting your surface at the same time.
Yes you can! Just use about 1oz in the soap dispenser. If you want more soap, just adjust the amount accordingly.
1oz of PolyWash® should cover approximately 440sqft of surface area. That means that a bottle will cover 7040 sqft. To make this a little more practical, we recommend using 1oz in a gallon of water for a regular washing of your car, or 2oz in a gallon if it is particularly dirty.
For General Purpose Cleaning:
Spray Directions:
For More Aggressive Cleaning:
Foam Canon Directions:
Unlike traditional soaps and washes, PolyWash™ will break up dirt and grime without damaging the surface. PolyWash™ is specially formulated to bond with all TopCoat® Sealers.
Our proprietary Micro-Bond™ technology means that PolyWash™ doesn’t just clean your car, but also gives it a sleek, water-repellent shine that also protects your finish.
A sudsy formula is key to a swirl-free wash. The extra suds provide more protection between your wash mitt and the surface.
While most washes will just clean the surface in preparation for a coating or sealant. Polywash provides a micro thin layer of F11 which helps prevent spotting and enhances any wax or sealant protection.
United StatesRemoves dirt effortlessly and makes the water beed. Highly recommended.
United StatesBest wash there is! Don’t use the “wax” stuff that’s out there. This is the real deal!
United StatesLittle goes a long way No film left behind repels rain
CanadaHave been buying it for 3 years and now have the rest of the family using and are very happy on their cars and house appliances
United StatesOutstanding results
United StatesFirst time trying the Poly Wash and I like it better than any of the other car soap products I have tried. Lots of suds and cleans great leaving a spotless finish. Thank you for another product that does what it says!
United StatesGreat product, best car wash that I have ever used. No water spots, great cleaner.
United StatesReally looks great after wash!!!
United StatesHave been using for quite sometime and this is my preferred wash product. I usually rinse off, but just as effective in a small area using a buffing technique.
United StatesI ran out of the Poly Wash and I bought some other well known product After using this product I found that it was leaving a slight film after rinsing. So I learned my lesson . Also, I learned that I can use my foam cannon with Poly wash. Over all I love all ur products. As Poly would say “Good job Top Coat.”
United StatesMy experience using Poly Wash has been excellent. I started with a small bottles which worked really well and now I've switched to the Gallon because of how well it works with the F11.
United StatesAfter riding back 1700 miles from Sturgis I unloaded my Bike and had to get out the wash. Used it and it was so easy and got all of the 2 1/2 days of road grime off. I also used the quick shine afterwards and completed the job. Simple to use.
We want you to be 100% satisfied with everything you buy from TopCoat. And if you’re not entirely happy with your purchase we will refund your money in full, or exchange the goods. All we ask is that you contact our customer services and then return the products back to us.
