TopCoat® PolyWash® 1-Kit

For General Purpose Cleaning:

• Use 2oz of PolyWash® per gallon of water. For light cleaning use 1oz of PolyWash™ per gallon.
• Pour PolyWash® into a bucket, then add water using the suggested ratio.
• Thoroughly wet the vehicle you intend to wash.
• Apply the mixed PolyWash® to the wet surface using a sponge or wash mitt, wiping and washing the surface as you go.
• Rinse thoroughly and then dry after.

Spray Directions:

• Pour 1/2oz of PolyWash® into a 32oz spray bottle already filled with water, then shake.
• Spray on surface and wipe off using clean microfiber towels a section at a time.
• Do not allow to dry before wiping clean.

For More Aggressive Cleaning:

• Spray PolyWash® on a section at a time.
• Agitate surface with a cellulose sponge, microfiber wash mitt, or microfiber applicator pad.
• Then wipe off using a clean microfiber towel until dry.

Foam Canon Directions:

• Leave enough room to pour 1-2oz of PolyWash® in a water filled foam canon container.
• Note: For more desired sudsing/foaming add extra PolyWash™.
• Connect foam cannon container to foam spray-head then shake to mix.
• Attach to hose and go!
• Rinse thoroughly and towel dry or blow off water.

• Safe for your finish: Unlike traditional soaps and washes, PolyWash® will break up dirt and grime without damaging the surface. Perfect surface prep for F11®: PolyWash® is specially formulated to bond with all TopCoat® Sealers.
• A little goes a long way: Our ultra-concentrated formula means you can use as little as 1oz per gallon of water! Our high-tech MycroBond™ coating leaves behind a water-repellent, protective shine.
• Use it in a sprayer, foam cannon, or the traditional bucket-- And get the same great results with whatever method you prefer! Wash, clean, shine, and protect with this one revolutionary product!