TOPCOAT® PREP & MAINTENANCE KIT


TopCoat® PolyWash™ will break up dirt and grime without damaging the surface and is the perfect surface prep for F11®.

TopCoat® Spritz®is an easy, one-step, hand application that enhances the existing surface.

This Kit Contains:

  • 1 - 16oz TopCoat® PolyWash™
  • 1 - 16oz TopCoat® Spritz™
  • 2 - TopCoat® Ultra-MicroPro™ 18 Professional Detail Microfiber Towels

 *Keep out of reach of children

(Always refer to product SDS and/or TDS sheets for further product and safety information.)* 

TopCoat® Ships International!

Our TopCoat Products ship internationally.

Safe for your vehicle and the environment

Since TopCoat® products are water-based (rather than chemical-based), it is safe to use in your driveway and around your children and pets. And unlike some other products, there is no runoff that risks polluting the environment.

A little goes a long way

You can use as little as 1oz per gallon of water for a regular wash, or 2oz if things are a little dirtier than usual. This means up to 16 washes per bottle!

Works perfectly with other TopCoat® products

All TopCoat® products are specially formulated to be used together. PolyWash™ is the perfect surface preparation for a coat of F11®, HPS or Spritz for an even longer-lasting shine.

Commercial-grade Micro-Bond technology

Our proprietary Micro-Bond technology means that PolyWash doesn’t just clean your car, but also gives it a sleek, water-repellent shine that also protects your finish.

Safely and effectively remove road dirt and grime

PolyWash makes quick work of dirt and debris that other washes and waxes have trouble with. And unlike traditional wash products, PolyWash won’t create spiderwebs in your finish.

Simple to use

Use PolyWash in a bucket, sprayer, or foam cannon. However you decide to use it, it’s simple to apply, cleans fast and easily towels dry for a streak-free shine.

Try TopCoat® PolyWash™, TopCoat® Spritz™, and the best microfiber towels in the industry, the TopCoat® Ultra-Micro-Pro18™ Towels! This kit is perfect for those who already have a supply of F11® and/or HPS™!

They all work and bond together, adding layers of improved performance and protection!

This Kit Contains:

1 - 16oz TopCoat® Spritz™ 1 - 16oz TopCoat® PolyWash™ 2 - TopCoat® Ultra-Micro Pro18™ Towels

*Keep out of reach of children

(Always refer to product SDS and/or TDS sheets for further product and safety information.)*

For General Purpose Cleaning: *

  • Use 2oz of PolyWash™ per gallon of water. For light cleaning use 1oz of PolyWash™ per gallon.
  • Pour PolyWash™ into a bucket, then add water using the suggested ratio.
  • Thoroughly wet the vehicle you intend to wash.
  • Apply the mixed PolyWash™ to the wet surface using a sponge or wash mitt, wiping and washing the surface as you go.
  • Rinse thoroughly and then dry after.

Spray Directions:

  • Pour 1/2oz of PolyWash™ into a 32oz spray bottle already filled with water, then shake.
  • Spray on surface and wipe off using clean microfiber towels a section at a time.
  • Do not allow to dry before wiping clean.

For More Aggressive Cleaning:

  • Spray PolyWash™ on a section at a time.
  • Agitate surface with a cellulose sponge, microfiber wash mitt, or microfiber applicator pad.
  • Then wipe off using a clean microfiber towel until dry.

Foam Canon Directions:

  • Leave enough room to pour 1-2oz of PolyWash™ in a water filled foam canon container.
  • Note: For more desired sudsing/foaming add extra PolyWash™.
  • Connect foam cannon container to foam spray-head then shake to mix.
  • Attach to hose and go!
  • Rinse thoroughly and towel dry or blow off water.

Q. How much surface area does one bottle cover?

A. 1oz of PolyWash™ should cover approximately 440sqft of surface area. That means that a bottle will cover 7040sqft. To make this a little more practical, we recommend using 1oz in a gallon of water for a regular washing of your car, or 2oz in a gallon if it is particularly dirty.

Q. Will this remove wax? Will this clean off water spots?

A. PolyWash™ will not remove wax, and because it helps prep the surface to bond with our other products, it is the perfect product to use before applying a coat of F11®. PolyWash™ will not remove water spots, but due to the nature of the coating it applies, will significantly reduce the amount of new water spots that are able to form on the surface.